Applications Using Rock Tools Attachments

We have Saws for Cutting Rock, Fiberglass, Concrete, Rock Grinders, and Screening Buckets.

Dimensional Stone Quarry

Rock Saws can cut square blocks for easy transport.

Save time and material when making primary cuts to your requirements reducing or eliminating the need to trim blocks after excavation. Using the excavator arm linkage long straight cuts are easy to produce. Learn more about our rock saw attachments.

Rock Saws
Material: Limestone
Application: Dimensional stone
Saw Model: TC10
Blade Diameter: 126″
Cut width: 2.25″
Cut depth: 54″

Wind Turbine Demolition and Recycling

Widely used in recycling projects cutting fiberglass with steel dowels, this diamond saw is fitted with dust suppression and eliminates dangerous handheld tools. Our diamond saw attachments may be the perfect attachment for your next project. Learn more here.

Material: Fiberglass
Saw Model: DS3
Blade Diameter: 36″
Cut Width: 0.275″
Cut Depth: 14″

Concrete Cutting

Providing the versatility to reach 30 feet above ground level this tungsten carbide saw eliminated the use of a hydraulic hammer by slicing the concrete into manageable pieces for further processing offsite. Our powerful concrete saw attachments come in a variety of sizes. Learn more here.

Material: Concrete
Saw Model: TC8
Blade Diameter: 104in
Cut Width: 2.5″
Cut Depth: 42″

Jersey Barrier Cutting

Conveniently cut concrete transitioning through Jersey barriers curbs and roads without multiple setups for all varieties of concrete work. This allows for cutting expansion joints on-site without hand-held tools. Learn more about our concrete saw attachments and the different applications they can be used for.

Material: Concrete
Saw Model: DS4
Blade Diameter: 48″
Cut Width: .275″
Cut Depth: 20″

Precise Wall Cuts in Sandstone

Tungsten carbide saw when fitted with an offset extension provides precise cuts along property lines/boundaries eliminating over-excavation saving excess concrete usage and no vibration. Learn more about our tungsten carbide saw attachments.

Material: Sandstone
Saw Model: TC8
Blade Diameter: 104″
Cut Width: 2.25″
Cut Depth: 42″

Aluminum Cutting and Recycling

These saws eliminate dangerous handheld saws and attach to a carrier machine in minutes.

This enables the saw to cut material wherever the carrier excavator can reach, be it at the bottom of a trench or high above a road surface on a bridge deck. Saw blades are easily replaced using simple tools. Learn more about our tungsten carbide metal saw attachments here.

Material: Aluminum
Application: Downsizing Material to be Reprocessed
Saw Model: TCM4
Blade Diameter: 48in
Cut Width: 0.275″
Cut Depth: 20″

Pipeline Cutting / Steel Demolition

These saws eliminate dangerous handheld saws and attach to a carrier machine in minutes.

This enables the saw to cut material wherever the carrier excavator can reach, be it at the bottom of a trench or high above a road surface on a bridge deck. Saw blades are easily replaced using simple tools. Learn more about our metal saw attachments for your next project.

Material: Aluminum
Saw Model: CS75
Blade Diameter: 30″
Cut Width: 0.5″
Cut Depth: 10″

Sieving and Seperating Oversize Material

The sieving bucket is designed to separate oversize material.

One and a half-inch material passes through screen oversize stays in the bucket for easy sorting. The sieving bucket uses hydraulic power to shake material through oscillating screens. Interchangeable grids separate material down to 1/2″ minus. Learn more about our sieving bucket attachments.

Material: Concrete
Application: Separating Grading Oversize Material
Bucket Model: VS20

Screening Backfill

Screening dirt to be used as backfill.

The pictured screening bucket for the skid steer has one-inch spacing on the screening disks. Our screening bucket is great for topsoil, peat, fill dirt, and compost. Learn more about our screening buckets.

Material: Fill Dirt
Model: SB07 on Skid Steer
Screening Area: 6′
Struck Volume: 1.5′

Trenching in Limestone on Pipeline Project

Grinding rock seam along a pipeline, producing a byproduct that can often be used as backfill.

This enables use in environmentally sensitive areas such as adjacent gas lines or structures where minimization of vibration is critical. Do you need more info about our high-performance rock grinders? Learn more here.

Material: Limestone
Grinder Model: G10
Cut Width: 29.13″